finite element analysis
The Research and Contrast on RC、SRC Transfer Beam and the Combined Action with upper Short-Pier Shear Wall
This article is aimed at the engineering of short-pier shear walls structure for beam transfer layer of reinforced concrete(RC),introduces steel reinforced transfer structure, on the theory basis of stress and deformation state acted jointly between steel reinforced transfer beam structure,section steel transfer beam structure of high building and upper shear wall,compares and analyzes section stress [...]
3D-FEM Analysis and Anti-seismic Safety Evaluation for High Core-wall Rockfill Dam
The construction of high earth-rock dams had developed fast in the recent years.High earth-rock dams had built in the western areas which held rich water resources.But most of western areas located in high earthquake intensity regions.So the anti-seismic safety evaluation for high dams was very important.Specially after wenchuan earthquake the stress and deformation of high [...]
Dynamic Analysis and Design Calculation Method Study of the Six Degree of Freedom Shaking Table Foundation
Design and processing the large-scale shaking table’s foundation are very important.If it’s designs and processes unreasonable,it will serious influence scene person,house structure security,neighboring building and environment.At present shake table foundation design mainly according to the foundation vibration to the test equipment,the system parameters target,building’s influence and the environment protection standard carries on in domestic and [...]
Dynamic Structural Characteristic of Xi’an Dongyue Temple
The Chinese history is glorious,there is 7000 years about the history of ancient Chinese architecture according to the real object.In the long historic course,ancient Chinese architecture has formed the independent bright characteristic gradually.However,there are some difficulties and many limitable conditions in the course of the research on scientific research of ancient chinese architecture,as a result [...]
Application of Magneto-Rheological Damper in Large-scale Structure Dynamic Control
Magneto-Rheological(MR) fluid is a kind of smart material got great development in recent years.MR dampers are continuously adjustable damping,wide dynamic range,fast response and low power consumption which can be made the semi-active vibration isolation systems as required.Because of complex nonlinear damping characteristic of MR damper,the dynamic description of the current model and the requirements of [...]
Research on Steel Slag and Graphite Conductivity Asphalt Concreate
Conductive asphalt concrete pavement plays an important role in snowmelt and decing,security monitoring and intelligent management.It’s have broad application prospect.As the traditional,Most of the Conductive Asphalt Concrete is to add Graphite or carbon fibre and so on in the asphalt.To increase it’s conductivity.For the aggregate occupy most of the asphalt concreate is not have contribute [...]
Analysis and Research on Capability of Automotive Gearshift System
Automobile is an important transportation vehicles,and also is a sign of science and technology development level.Automobile industry is capital-intensive, technology-intensive,personnel-intensive,highly integrated,cost-effective high industry.With the development of economic,the automobile has entered daily life of ordinary families,in the same time,the requirements of people on the vehicle performance is also rapidly rising.So,automotive gearshift system,as the impact of an [...]
Finite Element Analysis on Structure of Automotive Sunroof
Automotive Electronic Sunroof is the largest and the most complex components in body accessories and is a high-tech product of electromechanical integration.It has advantages of ventilation,the wide field of vision,etc.,so it has been used in more and more cars.In the past five years,with the rapid development of Chinese automotive industry,total production has leapt to third [...]
Numerical Analysis on Seismic Performance of T-Section Concrete-filled Steel Tubular Columns
Concrete-filled steel tube structure refers to the steel pipe filled with concrete to form a new type of composite structure. Because of the restraining action of the pipe to the role of the core concrete, the concrete is under complex stress state, so that the strength of concrete will be increased and the plasticity and [...]
Structural Analysis of the Composite Wind Blade Using Finite Element Method
Study on the method for structural design and analysis of the composite wind blade is always one of the hot social studies. It is of great significance to promote the effective use of green resources.In this thesis, the work done by the following:1) Came to understand the basic principles of aerodynamic design of the wind [...]